CTC offers a variety of adhesive and...
CTC offers a variety of adhesive and stud mounted sensor mounting pads. These are available with magnet pad options for portable field applications which include both the flat and two rail mounting options.
S&V Samford Instruments LTD
Availability date:
S&V Samford Instruments Ltd
CTC offers a variety of adhesive and stud mounted sensor mounting pads. These are available with magnet pad options for portable field applications which include both the flat and two rail mounting options. CTC offers vibration pads to ensure very repeatable targets for route base vibration measurement needs. Specialty mounting accessories for fin cooled motors are available, as well as a variety of extension adapters are also available to allow access to bearing locations not typically permitted due to restricted access.
----
CTC提供了各种粘合剂和螺柱安装的传感器安装垫。 这些可用于便携式现场应用的磁垫选件,包括平板和两个导轨安装选件。 CTC提供防震垫,以确保需要经常重覆测量的目标,以满足基于路由的振动测量需求。 提供用于翅片冷却电机的专用安装附件,并提供各种扩展适配器,以允许进入由于限制进入而通常不允许的轴承位置。
------------------------------------------
-----------------------
RARE EARTH MAGNETIC BASES, FLAT SURFACE
------
MH103-1B Flat Surface Magneic Base, 40 lbs, Pull Strength, 1.00" OD, .42" Height
MH104-1B Flat Surface Magneic Base, 40 lbs, Pull Strength, 1.00" OD, .42" Height
MH122-1A Flat Surface Magnetic Base, 40 lbs. Pull Strength, 1.00" OD, .68" Height
MH123-1A Flat Surface Magnetic Base, 60 lbs. Pull Strength, 1.25" OD, .68" Height
MH136-1A Magnetic base for flat surfaces, 1/4-28 mounting stud, 25 lbs. Pull Strength, 0.75" OD, .68" Height
MH149-1A Flat Magnet with 1/4 x 28 tapped hole, 25 lbs. Pull Strength, 0.75" OD, .68" Height
MH154-1B Magnetic base for flat surfaces, 10-32 mounting stud, 15 lbs. Pull Strength, 0.58" OD, .33" Height
------
------
RARE EARTH MAGNETIC BASES, MULTI-PURPOSE
MH112-1A Magnetic base, multi purpose, 1/4-28 integral stud, 30 lbs. Pull Strength, 1.00" OD, .70" Height
MH114-3A Magnetic base, multi purpose, 1/4-28 tapped hole, 50 lbs. Pull Strength, 1.40" OD, .75" Height
MH114-3T Magnetic base, multi purpose, 1/4-28 tapped hole with triaxial alignment notch, 50 lbs. Pull Strength, 1.39" OD, .75" Height
MH115-2A Magnetic base for curved surfaces, 95 lbs. Pull Strength, 1.85" OD, 1.10" Height
MH128-1A Multi-Purpose Magnetic Base, 30 lbs. Pull Strength, 1.00" OD, .94" Height
MH137-1A Magnetic base, multi purpose, 1/4-28 mounting stud, 15 lbs. Pull Strength, 0.75" OD, .68" Height
MH140-1A Multi-Purpose Magnetic Base Ultra Magnet, for curved surfaces, 120 lbs. Pull Strength, 1.85" OD, 1.10" Height
MH141-1A Multi-Purpose Magnetic Base, Low Profile, M5 tapped hole, 50 lbs. Pull Strength, 1.40" OD, .75" Height
MHA142-1A Multi-Purpose Magnetic Base, Low Profile, M8 tapped hole, 50 lbs. Pull Strength, 1.40" OD, .75" Height
MH147-1A Magnetic base, multi purpose, M6 x 1 tapped hole, 50 lbs. Pull Strength, 1.40" OD, .75" Height
MH153-1A Magnetic base, multi purpose, M5 mounting hole, 30 lbs. Pull Strength, 1.00" OD, .94" Height
MH214-3A 2 Pole Adjustable placement magnet, 50 lbs. Pull Strength, 1.40" OD, .75" Height
----
----
ACCELROMETER INSTALLATION TOOL KIT
------
ADHESIVE MOUNTING PADS
MH101-1B Mounting disk, 1" (25 mm) diam, 1/4-28 integral mounting stud
MH102-1A Magnet mounting target, 1" (25 mm) diam, 1/4-28 integral mounting stud
MH130-1A Mounting disk, 1" (25 mm) diam, 1/4-28 tapped hole
MH130-1T Mounting disk, 1" (25 mm) diam, 1/4-28 tapped hole, with triaxial accelerometer locating notch
MH130-1B Mounting disk, 1" (25 mm) diam, 1/4-28 thru hole
MH130-3A Mounting disk, 1 1/4"(32 mm) diam, 1/4-28 tapped hole
MH130-6A Mounting disk, 1" (25 mm) diam, M6 tapped hole
MH130-8A Mounting disk, 1" (25 mm) diam, M8x1.25 tapped hole
MH133-1A Low profile magnet target
MH144-1A Triaxial mounting block with 1/4-28 captive bolt
MH150-1A Magnet target, 1.5 inch diameter, made from 17-4 stainless steel.
MH151-1A Isolated mounting pad
--------
ADHSIVES
MH109-2A Devocon plastic welder adhesive Kit
MH109-3A Epoxy kit for field installable connectors, 10 g epoxy with 10 ml syringe
------
SPECIALTY MOUNTING ADAPTERS
MH134-1A Zerk adapter mounting pad for accelerometers, 1/4" NPT mounting thread
MH134-1B Accelerometer Mounting Pad with 45 Degree Zerk Grease Fitting Adapter, 1/4"-18 NPT Grease Fitting Thread
MH134-2A Zerk adapter mounting pad for accelerometers, 1/8" NPT mounting thread
MH134-3A Accelerometer Mounting Pad with Zerk Grease Fitting Adapter, 1/4" SAE-LT Grease Fitting Thread
MH134-3B Accelerometer Mounting Pad with 45 Degree Zerk Grease Fitting Adapter, 1/4" SAE-LT Grease Fitting Thread
MH134-4A Accelerometer Mounting Pad with Zerk Grease Fitting Adapter, 1/4"-18 NPT Grease Fitting Thread
MH134-5A Accelerometer Mounting Pad with Zerk Grease Fitting Adapter, 1/8"-27 NPT Grease Fitting Thread
MH134-5B Accelerometer Mounting Pad with 45 Degree Zerk Grease Fitting Adapter, 1/8"-27 NPT Grease Fitting Thread
MH134-6A Accelerometer Mounting Pad with Zerk Grease Fitting Adapter, 1/4" SAE-LT Grease Fitting Thread
MH134-6B Accelerometer Mounting Pad with 45 Degree Zerk Grease Fitting Adapter, 1/4" SAE-LT Grease Fitting Thread
MH145-1B Button head grease fitting adapter 1/8-27 NPT mounting thread
------
--------
MOUNTING STUDS
MH108-1B 1/4-28 to 1/4-28, stainless steel mounting stud
MH108-3B 1/4-28 to 10-32 adapter stud, stainless steel
MG108-4B 1/4-28 stainless steel set screw, 1/2" length
MH108-5B 1/4-28 to M6x1 adapter stud, stainless steel
MH108-6B 1/4-28 to M8 adapter stud
MH108-7B 1/4-28 to M10 adapter stud
MH108-8B 1/4-28 stainless steel captive bolt, 1 5/16" length
MH108-9B 1/4-28 stainless steel socket head cap, 1 5/16" length
MH108-10B M6x1, stainless steel captive bolt, 33.3 mm, 1-5/16" Length
MH108-11B 10-32 Adapter bolt for use with CTC triaxial accelerometers
MH108-12B M6, 35.13 mm (1.383") Length, Stainless Steel Captive Bolt for CTC AC136 and TA Side Exit Sensors
MH108-13B M6, 25.04 mm (.986") Length, Stainless Steel Captive Bolt for Small Side Exit Sensors
MH108-14B 1/2" NPT plug to 1/4-28 threaded hole adapter
MH108-16B 1/4" NPT plug to 1/4-28 threaded hole adapter
MH108-18B 1/4 - 28, 1.14” Length, Captive Bolt for CTC AC115 and AC230 Triaxial Sensors
MH108-19B M6, 29.97 mm (1.18") Length, Captive Bolt for CTC AC115 and AC230 Triaxial Sensors
MH108-20B 1/4 - 28, 1” Length, Captive Bolt for CTC AC144 and AC244 Sensors
MH108-21B 1/4 - 28, 1.27” Length, Captive Bolt for CTC AC194 and AC294 Sensors
MH108-22B M6, 28.19 mm (1.11") Length, Captive Bolt for CTC M/AC194 and M/AC294 Sensors
MH108-24B M8 x 1.25, Captive Bolt for Medium Side Exit Accelerometers, CTC AC198 Sensors
MH108-25B M8 x 1.25, Captive Bolt for Standard Side Exit Accelerometers, CTC AC184 and AC188 Sensors
MH108-26B Captive Bolt 1/4 - 28, 1.3825” Length, used with TA and CTC AC136 Sensors
MH108-30B 1/4-28 to M5, Stainless Steel Mounting Stud
MH108-31B 10-32 to M6, Stainless Steel Mounting Stud
MH108-32B 10-32 to M5, Stainless Steel Mounting Stud
MH108-33B 10-32, Stainless Steel Set Screw, 3/8" length
MH143-1A Hex head mounting stud for accelerometers, SPM compatible, 28mm
MH143-2A Hex head mounting stud for accelerometers, SPM compatible, 64mm
------
HIGH FREQUENCY MAGNET SYSTEM
MH127-3G High frequency magnet system, 2 magnets, 500 targets with cap covers
MH127-3H High frequency magnet system, 4 magnets, 1000 targets with cap covers
MH12793H High frequency magnet system, 4 magnets, 1000 targets with cap covers
MH127-3B High frequency magnet system,2 magnets, 50 targets with cap covers
MH128-3C High frequency magnet system,2 magnets, 110 targets with cap covers
------------------
ACCELEROMETER QUICK DISCONNECT
MH107-1A Quick disconnect receptable
MH107-1B Qucik disconnect stud
MH107-2B Quick disconnect stud with through-hole mounting, 1/4-28 socket head cap screw included
MH107-3B Quick disconnect stud with through-hole mounting, M6x1 socket head cap screw included
MH107-2C to 6A Quick disconnect kits with different sepcifications.
----------------
MOTOR FIN MOUNT PROBE PADS
MH118-1A Fin mount probe pad,.5" x 1.25" (12.7 mm x 31.75 mm) probe tip
MH118-2A Fin mount probe pad,.5" x 2.0" (12.7 mm x50.8 mm) probe tip
MH118-3A Fin mount probe pad,.25" x 1.75" (6.35 mm x 44.45 mm) probe tip
MH118-4A Fin mount probe pad,.25" x 1.0" (6.35 mm x25.4 mm) probe tip
MH118-5A 40 piece assortment kit. 10 pieces each of MH118-1A, MH118-2A, MH118-3A, MH118-4A
------
---------
PROBE TIPS FOR PROTABLE MEASUREMENTS
MH119-3A Accelerometer probe tip, 8"(203.2 mm) length, with 1/4-28 mount for accelerometer
SENSOR PROTECTOR
MH119-1A Accelerometer probe tip, 2 1/2"(63.5 mm) length, with 1/4-28 mount for accelerometer
MH119-2A Accelerometer probe tip, 4"(101.6 mm) length, with 1/4-28 mount for accelerometer
-------
SENSOR PROTECTOR
MH148-1A Stainless steel sensor protector for side exit sensors
MH152-1A Aluminum Sensor Protector for Top Exit Sensors
---------------------------
Connection Technology Center, Inc.(CTC)–offers a complete line of industrial accelerometers that withstand temperatures in the range of -58° to 325° F, (-50° to 162° C). Our ruggedized industrial accelerometers are available in both top and side exit configuration. --- CTC...
CTC offers a High Temperature Accelerometer capable of operating in industrial environments with temperatures up to 650° F (343° C). S&V Samford Istruments LTD More Details: CTC Accelerometer
CTC offers a variety of cable and connector offerings for both permanent and portable field applications. CTC’s permanent mount cable options are available with cable jacketing of polyurethane, Teflon, stainless steel armor protected and stainless-steel braided armor. S&V Samford Instrument Ltd More Details: CTC Cable & Connectors
CTC offers a wide variety of junction box solutions to allow monitoring of remotely mounted vibration sensors, which otherwise would be restricted to human access due to safety considerations. CTC- Junction Boxes More Details: CTC Junction Box
CTC offers a variety of OEM replacement data collector cables and portable cable options for all major vibration analyzer manufacturers. Data collector cables and data collector adapters are available in both coiled and straight cable options. ---
CTC offers a wide array of 4-20 mA output solutions for industrial applications. CTC’s standard loop powered vibration sensors are available with velocity as well as acceleration output measurements options. S&V Samford Instruments LTD. More Details : 4 to 20mA Velocity Sensors
CTC offers a complete line of proximity probes systems designed and built to endure the toughest industrial environments. Proximity probes systems are offered with probe tip sizes in 5mm, 8mm, 11mm and 25mm diameters. ----- S&V Samford Instruments LTD. More Details : Proximity Probes
CTC’s PRO line offers a variety of products for hazardous/intrinsically rated areas Class 1 Division 1, Class 1 Division 2, ATEX Zone 0, ATEX Zone 1, ATEX Zone 2 and IECEx including both the top and side exit sensor case design. S&V Samford Instruments LTD.
CTC offers a variety of Hazardous area sensors for rated areas Class 1 Division 1, Class 1 Division 2, ATEX Zone 0, ATEX Zone 1, ATEX Zone 2 and IECEx including both the top and side exit sensor case designs. ------------
CTC’s Signal Conditioner Enclosures are turnkey solutions coming fully populated with signal conditioners, power supply, and terminal blocks for sensor terminations. The signal conditioners are available pre-configured based on the customer’s specific requirements. s&v Samford Instruments LtD.
General purpose accelerometer designed for use on a wide variety of machine types with its broad frequency response of 0.5 to 10 kHz (+/- 3dB), 50g range, and mounted resonance of 13 kHz. More Details : Metrix Sensors
The Metrix SA6200UW Underwater Accelerometer is designed for applications that are continuously or frequently exposed to very high levels of condensing humidity, such as cooling tower structures. It features a molded integral cable and an IP68 rating, suitable for continuous submersion. More Details : Metrix Sensors
Metrix proximity probes are interchangeable with Bently Nevada Series 3300, 7200, and 3000. All probes incorporate the latest technology and include agency approvals. More Details : Metrix Probes
LV-7000 series detects speed, uneven speed, distance, length of moving object or rotating object by non-contact detection with high sensitivity and high response. LV-7200 New Laser Doppler Surface Velocity Meter ! Ono sokki More Details : LV-7000 series
CTC offers low power consumption sensors for use with battery powered wireless signal transmission systems. CTC’s low power consumption sensors are compatible with many wireless transmission systems, and available in sensitivity of 25mV/g and 100 mV/g.
MD Series Torque Detector Micro Capacity Type The MD series torque detector is designed to measure the torque output from compact & precision type motors used in the electric & electronics industry, the automotive industries and so on, featuring outstanding low inertia and low starting torque.
For field industrial vibration test applications that require an AC output signal for dynamic vibration analysis, CTC offers both battery powered and line voltage power supplies for powering IEPE vibration sensors. CTC offers power supplies in one, three and twelve channel options. S&V Samford
CTC offers Piezo Velocity sensors for a variety of vibration analysis applications. CTC提供用于多种振动分析应用的压电速度传感器。
CTC NEW Ultrasound Sensor - UEB330 Series Ultrasound Sensor, 100mV/g, Top Exit, 2 Pin mini-MIL Connector, 1/4-28 Mounting UEB330, UEB430 , UEB530
CTC Wireless Transmitter CTC's WA 100 Wireless series features fully molded wireless transmitters and open network soteare for cutting edge data collection. The WA100 series an ideal solution for permanent monitoring applications, eliminating the need for standard connectors, cabling, and junction boxes. --- More Details: the WA102- booklet
Tri-Axial Accelerometer NP-3564N10 Compact/ Light / High sensitivity TEDS* comatible Tri-Accelelrometer ----- ----- *Transducer Electronic Data Sheet