17. CTC Power Supplies and Test equipment

For field industrial vibration test applications that require an AC output signal for dynamic vibration analysis, CTC offers both battery powered and line voltage power supplies for powering IEPE vibration sensors. CTC offers power supplies in one, three and twelve channel options. 

S&V Samford 

More details

For field industrial vibration test applications that require an AC output signal for dynamic vibration analysis, CTC offers both battery powered and line voltage power supplies for powering IEPE vibration sensors. CTC offers power supplies in one, three and twelve channel options. CTC also offers test equipment and instruments for verifying the overall condition of all field connections, and sensor integrity. 

-----

CTC Power Supplies 

PS01                 Single channel battery power supply for accelerometers and piezo velocity transducers, BNC

                          input/output

PS03                 Three channel battery power supply for accelerometers and piezo velocity transducers, BNC

                          input/output

PS12A               Rack mountable 12 channel IEPE power supply for accelerometers and piezo velocity transducers

-------

-----

-----

TEST EQUIPMENT

CTC offers test equipment and instruments for verifying the overall condition of all field connections, and sensor integrity.  Also offered is test equipment for verifying the overall linear calibration of proximity probes.

------

Test Equipment

TM1018           This meter will tell you if your accelerometer, cable and/or switch box is in working condition. It will also 

                        display the exact voltage of your accelerometer.

DT901-08-S1   Proximity probe field calibrator unit with 8 mm 3/8-24 probe mount with cover and quick release latches

S&V 

-----

Torque Wrench And Fitting

IT1020            3/8" drive, dual scale torque wrench with 2 in. lb. increments

IT102-1A          7/16" crowfoot wrench, for 3/8 drive torque wrench

IT102-2A         9/16" crowfoot wrench, for 3/8 drive torque wrench

IT102-3A         11/16" crowfoot wrench, for 3/8 drive torque wrench

IT102-4A          7/8" crowfoot wrench, for 3/8 drive torque wrench

IT102-5A         1" crowfoot wrench, for 3/8 drive torque wrench

IT102-1B          10mm crowfoot wrench, for 3/8 drive torque wrench

IT102-2B         13mm crowfoot wrench, for 3/8 drive torque wrench

IT102-3B         14mm crowfoot wrench, for 3/8 drive torque wrench

IT102-4B         22mm crowfoot wrench, for 3/8 drive torque wrench

IT102-1C          3/16 allen, for 3/8 drive torque wrench

-------

Triax Installation Driver

IT1030             Hex Driver Kit - Includes Hex Driver, 3/16 Hex Bit and 5mm Hex Bit

IT103-1A          1/4 Hex Driver for 3/16 or 5mm Hex Bit

---

----


---

Back to CTC's Product list

Related Products

‹ ›

Connection Technology Center, Inc.(CTC)–offers a complete line of industrial accelerometers that withstand temperatures in the range of -58° to 325° F, (-50° to 162° C).  Our ruggedized industrial accelerometers are available in both top and side exit configuration.  --- CTC...

CTC offers a High Temperature Accelerometer capable of operating in industrial environments with temperatures up to 650° F (343° C). S&V Samford Istruments LTD More Details: CTC Accelerometer

CTC offers a variety of cable and connector offerings for both permanent and portable field applications. CTC’s permanent mount cable options are available with cable jacketing of polyurethane, Teflon, stainless steel armor protected and stainless-steel braided armor. S&V Samford Instrument Ltd More Details: CTC Cable & Connectors

CTC offers a wide variety of junction box solutions to allow monitoring of remotely mounted vibration sensors, which otherwise would be restricted to human access due to safety considerations.   CTC- Junction Boxes More Details: CTC Junction Box

CTC offers a variety of adhesive and stud mounted sensor mounting pads. These are available with magnet pad options for portable field applications which include both the flat and two rail mounting options.   S&V Samford Instruments LTD More Details: CTC Mounting Hardware

CTC offers a variety of OEM replacement data collector cables and portable cable options for all major vibration analyzer manufacturers. Data collector cables and data collector adapters are available in both coiled and straight cable options. ---

CTC offers a wide array of 4-20 mA output solutions for industrial applications. CTC’s standard loop powered vibration sensors are available with velocity as well as acceleration output measurements options.   S&V Samford Instruments LTD.  More Details : 4 to 20mA Velocity Sensors 

CTC offers a complete line of proximity probes systems designed and built to endure the toughest industrial environments. Proximity probes systems are offered with probe tip sizes in 5mm, 8mm, 11mm and 25mm diameters. ----- S&V Samford Instruments LTD.  More Details : Proximity Probes 

CTC’s PRO line offers a variety of products for hazardous/intrinsically rated areas Class 1 Division 1, Class 1 Division 2, ATEX Zone 0, ATEX Zone 1, ATEX Zone 2 and IECEx including both the top and side exit sensor case design.  S&V Samford Instruments LTD. 

CTC offers a variety of Hazardous area sensors for rated areas Class 1 Division 1, Class 1 Division 2, ATEX Zone 0, ATEX Zone 1, ATEX Zone 2 and IECEx including both the top and side exit sensor case designs. ------------

CTC’s Signal Conditioner Enclosures are turnkey solutions coming fully populated with signal conditioners, power supply, and terminal blocks for sensor terminations.  The signal conditioners are available pre-configured based on the customer’s specific requirements.   s&v Samford Instruments LtD. 

General purpose accelerometer designed for use on a wide variety of machine types with its broad frequency response of 0.5 to 10 kHz (+/- 3dB), 50g range, and mounted resonance of 13 kHz. More Details : Metrix Sensors

The Metrix SA6200UW Underwater Accelerometer is designed for applications that are continuously or frequently exposed to very high levels of condensing humidity, such as cooling tower structures.  It features a molded integral cable and an IP68 rating, suitable for continuous submersion. More Details : Metrix Sensors

Metrix proximity probes are interchangeable with Bently Nevada Series 3300, 7200, and 3000. All probes incorporate the latest technology and include agency approvals. More Details : Metrix Probes

LV-7000 series detects speed, uneven speed, distance, length of moving object or rotating object by non-contact detection with high sensitivity and high response. LV-7200  New Laser Doppler Surface Velocity Meter !  Ono sokki  More Details : LV-7000 series

CTC offers low power consumption sensors for use with battery powered wireless signal transmission systems.  CTC’s low power consumption sensors are compatible with many wireless transmission systems, and available in sensitivity of 25mV/g and 100 mV/g.

MD Series Torque Detector  Micro Capacity Type The MD series torque detector is designed to measure the torque output from compact & precision type motors used in the electric & electronics industry, the automotive industries and so on, featuring outstanding low inertia and low starting torque. 

CTC offers Piezo Velocity sensors for a variety of vibration analysis applications.   CTC提供用于多种振动分析应用的压电速度传感器。

CTC NEW Ultrasound Sensor - UEB330 Series Ultrasound Sensor, 100mV/g, Top Exit, 2 Pin mini-MIL Connector, 1/4-28 Mounting UEB330, UEB430 , UEB530

CTC Wireless Transmitter CTC's WA 100 Wireless series features fully molded wireless transmitters and open network soteare for cutting edge data collection. The WA100 series an ideal solution for permanent monitoring applications, eliminating the need for standard connectors, cabling, and junction boxes.  --- More Details: the WA102- booklet 

  Tri-Axial Accelerometer NP-3564N10   Compact/ Light / High sensitivity TEDS* comatible Tri-Accelelrometer  ----- -----                                                             *Transducer Electronic Data Sheet